Subsoiler
Subsoiler
MegaTILLER — Subsoiler
Breaks up the plough pan and restores the soil's vertical structure at depth. Each shank trips away from obstacles and returns to depth on its own.
Manufacturer data — ES/26
up to 60 cm
Working depth
2,5–3,9 m
Working width
180–420 hp
Tractor power
up to 60 cm
Working depth
2,5–3,9 m
Working width
180–420 hp
Tractor power
arador.pro
REF: AGR-2026/MEG-001
FECHA: 07/07/2026
ORIGEN: Arador & Vomer · ES
CLASE: MAQUINARIA
NIVEL: TÉCNICO
COPIA: 1 / 1
// About the equipment
MegaTILLER
DESC.
The MegaTILLER is the subsoiler developed by Arador & Vomer to effectively break up compacted layers and restore the vertical soil structure, working down to 60 cm depth. It is available in two versions: MIX, with wrap-around geometry for intensive mixing of the intermediate and upper layers, and SUB, with high-penetration geometry for deep decompaction without disturbing the surface horizons.
TRANS.
With 97 cm ground clearance, 103 cm frame clearance and the Non-Stop Hydropneumatic safety with individual circuit per shank, the MegaTILLER works without blockages even with large quantities of crop residues or stubble. Breaking up plough pans is achieved at lower cost than traditional ploughing, thanks to improved water infiltration, greater aeration and better root development, which reduce the number of operations required.
DOC-AGR · TECHNOLOGY ARADOR & VOMER · 2026 19 PARAM.
// Technical specifications
DATA SHEET # Parameter Value
01
| Machine type
Subsoiler — MIX and SUB versions
02
| Hitch type
Three-point Cat. 3
03
| Working width
2,50–3,90 m
04
| max. depth
15 to 60 cm
05
| Ground clearance
97 cm
06
| Number of shanks
5–9 depending on model
07
| Row spacing
52,5 cm (mod. 25) / 42,5 cm (mod. 30) / 42,5 cm (mod. 40)
08
| Non-Stop safety
Hydropneumatic with individual circuit per shank
09
| Available rollers
SPIKE · T-PACK · J630 · X-DISC 2
10
| Recommended power
180–420 hp
11
| Weight
2 050–2 950 kg
12
| Frame clearance
103 cm
13
| Total length
353 cm
14
| Safety bolt
Additional fuse per shank — double protection
15
| Working pressure adjustment
Central — single control point
16
| Roller mount
Tubular parallelogram with integrated hydraulic control
17
| Track eraser disc
On elastomer, adjusted together with the roller
18
| Shanks
Interchangeable MIX ↔ SUB
19
| Maintenance
Greaseless technology — quick-change wear components
Approved data · subject to configuration
19 REG.
OK
// Dimensions
Available models
[ CERTIFIED DATA ]
01 MegaTILLER 25 MIX/SUB
models - Width
- 2,50 m
- Transport width
- 2,55 m
- Shanks
- 5 shanks
- Row spacing
- 52,5 cm
- Hitch
- Cat. 3
- Weight
- 2 050 kg
- Recommended power
- 180–280 hp
02 MegaTILLER 30 MIX/SUB
models - Width
- 3,00 m
- Transport width
- 3,05 m
- Shanks
- 7 shanks
- Row spacing
- 42,5 cm
- Hitch
- Cat. 3
- Weight
- 2 500 kg
- Recommended power
- 250–350 hp
03 MegaTILLER 40 MIX/SUB
models - Width
- 3,90 m
- Transport width
- 3,95 m
- Shanks
- 9 shanks
- Row spacing
- 42,5 cm
- Hitch
- Cat. 3
- Weight
- 2 950 kg
- Recommended power
- 320–420 hp
3 models · MegaTILLER — MIX and SUB
// Application Fields · Tactical Map
Application
application.
Active zones: 08 / 08
Status: operational
Ref: AGR-MAP-V1
R1
R2
Col A
Col B
Col C
Col D
A1
01
Breaking up compacted layers and plough pans
B1
02
Deep decompaction down to 60 cm
C1
03
Improving rainwater infiltration
D1
04
Reducing waterlogging
A2
05
Soil aeration
B2
06
Mixing intermediate and upper layers (MIX version)
C2
07
Subsoiling without disturbing the surface (SUB version)
D2
08
Soils with large quantities of crop residues or stubble
Col A
Col B
A1
01
Breaking up compacted layers and plough pans
B1
02
Deep decompaction down to 60 cm
A2
03
Improving rainwater infiltration
B2
04
Reducing waterlogging
A3
05
Soil aeration
B3
06
Mixing intermediate and upper layers (MIX version)
A4
07
Subsoiling without disturbing the surface (SUB version)
B4
08
Soils with large quantities of crop residues or stubble
Photo record
Photo
documentation.
Photo record
01 15
Product
MegaTILLER
Format
Photo · Field
Ref.
VOM·2026·FIG.01
Total records
15 registros
// Photo documentation VOM·2026
Active record
FIG.01 — MegaTILLER
▶ VID.01
VID.01
▶ VID.02
VID.02
FIG.01
FIG.02
FIG.03
FIG.04
FIG.05
FIG.06
FIG.07
FIG.08
FIG.09
FIG.10
FIG.11
FIG.12
FIG.13
// Engineering & Design
Construction
overview.
11
Parameters
Operating system
01 Frame built from high-strength steel
02 Clean and robust frame design with great clearance and row spacing
03 Non-Stop Hydropneumatic safety system with individual circuit per shank
04 Additional safety fuse (extra safety bolt) on each shank
05 Shanks interchangeable between MIX and SUB versions
06 Maintenance-free technology (zero maintenance on joints)
07 Roller mount with tubular parallelogram and integrated hydraulic control
08 Track eraser disc mounted on elastomer, with joint adjustment to the roller
09 Central working pressure adjustment
10 MIX version: wrap-around geometry for penetration and mixing, dual-position wings, reversible share and upper fin, quick-change shares, maintenance-free
11 SUB version: high-penetration geometry, replaceable wide wing, quick-change share, quick-change flat plate, maintenance-free
// COMPETITIVE ADVANTAGES
Why choose this machine.
01
Reduction in the number of field operations required (fewer passes)
02
Lower cost than traditional ploughing (explicitly stated by the manufacturer)
03
No issues with large quantities of crop residues or stubble (stated for both MIX and SUB versions)
04
Maintenance-free technology: zero maintenance on joints
05
Quick-change shares and wear parts without complex tooling
06
Non-Stop Hydropneumatic system with individual circuit: overload protection without stopping work
07
Shanks interchangeable between versions: ability to change agronomic strategy without changing machine
08
Explicitly positioned against the chisel: "Beyond the chisel — Decompacts and mixes in depth"
ORIGINAL SPARE PARTS
Implements and accessories
compatible.
3 groups
8 implements
100% genuine
- 01
SUB ShankDeep decompaction: penetrates below the compacted layer down to 60 cm. High-penetration geometry that aerates and decompacts without disturbing the intermediate layers. No issues with large quantities of crop residues or stubble. Quick-change share with replaceable wide wing. Extra safety bolt. Maintenance-free.
- 02
MIX ShankIntensive mixing: working capacity down to 60 cm. Wrap-around geometry and angles that facilitate mixing of the intermediate and upper layers. Reversible share and upper fin for greater utilisation. Wings with dual position. Quick-change shares. Extra safety bolt. Maintenance-free. Interchangeable with the SUB Shank.
01
SUB Shank
02
MIX Shank
// TECHNICAL LEGEND · SYSTEMS & MODULES
SYSTEM
Non-Stop HN
ID·001 · ACTIVE
Non-Stop Hydropneumatic Safety
Hydropneumatic safety system with individual circuit per shank. When a shank encounters an obstacle, it yields individually without transmitting the impact to the rest of the machine. Extra safety bolt as a second level of protection.
PLATFORM
MIX
ID·002 · ACTIVE
MIX Configuration
Shank with wrap-around geometry for penetration and intensive mixing of the intermediate and upper layers. Reversible share and upper fin, wings with dual position.
PLATFORM
SUB
ID·003 · ACTIVE
SUB Configuration
Shank with high-penetration geometry: deep decompaction down to 60 cm without disturbing the intermediate layers. Quick-change share with replaceable wide wing.
SYSTEM
No Greasing
ID·004 · ACTIVE
Maintenance-free technology
No greasing points. Quick-change wear components (shares, plates, fins) for high durability and minimal downtime.
ROLLER
SPIKE
ID·005 · ACTIVE
Roller SPIKE
High-resistance tine roller in two alternating sections. Loosening, cutting and mixing after subsoiling. Ideal complement to the MegaTILLER MIX.
ROLLER
T-PACK
ID·006 · ACTIVE
Roller T-PACK
Smooth structure with longitudinal cutting profile. Crumbling and surface compaction. Ideal for light, loose or sandy soils.
ROLLER
X-DISC 2
ID·007 · ACTIVE
Roller X-DISC 2
Cutting discs in two alternating sections. High crop residue and stubble cutting power with very low compaction capacity.
ROLLER
J630
ID·008 · ACTIVE
Roller J630
D630 cage roller with large-diameter hollow bars. Versatile and multipurpose, with good crumbling and mixing capacity.
10
Years of Warranty
REF: #VOMER-2024
SERIE: AGR-10Y-BRZ
SERIE: AGR-10Y-BRZ
Arador & Vomer
Manufacturer
Arador & Vomer · Official certificate
Warranty
Certificate
Art. I Wear components easy to replace (stated as a design feature)
Art. II Maintenance-free technology (explicitly stated)
Art. III Quick-change shares, fins and plates (explicitly stated)
Art. IV No warranty period stated in the catalogue
Arador & Vomer
Manufacturer
Arador & Vomer · Valid from issue date arador.pro
0€
AFTER-SALES SERVICE
All included.
Zero cost.
5 free services
1998 in the field
∞ post-warranty support
01
Delivery
All Europe
FREE
01
02
Commissioning
At your farm
FREE
02
03
Training
Theory + practice
FREE
03
04
Warranty
Support 24/7
FREE
04
05
Post-warranty
Forever
FREE
05
Technical response within 24h
No small print or exclusions
Financing available
Frequently asked questions
Everything you need to know
01
What is the difference between the MIX version and the SUB version?
See answer
02
What is the Non-Stop Hydropneumatic safety?
See answer
03
How much cheaper is the MegaTILLER compared to traditional ploughing?
See answer
04
What tractor power does the MegaTILLER require?
See answer
Coming soonAgricultural analysis
We’re building the newsroom
A farm-analysis outlet —grain prices, CAP rules, input costs— written by people who work the land. Right now we’re bringing the writers together.
Do you write about farming? Join the newsroom→- 01Regulations & subsidies
- 02Costs
- 03Markets & climate