Combination drill — tine front tool
Combination drill — tine front tool
Kharma C PRO — Combination drill — tine front tool
Preps with tines for more depth on hard ground and seeds at the same time. Metering from fine to large seed without changing rollers, with GPS shutoff.
Manufacturer data — ES/26
3–6 m
Working width
3000–4000 l
Hopper capacity
120–350 hp
Tractor power
3–6 m
Working width
3000–4000 l
Hopper capacity
120–350 hp
Tractor power
arador.pro
REF: AGR-2026/KHA-001
FECHA: 07/07/2026
ORIGEN: Arador & Vomer · ES
CLASE: MAQUINARIA
NIVEL: TÉCNICO
COPIA: 1 / 1
// About the equipment
KharmaCPRO
DESC.
The Kharma C PRO by Arador & Vomer combines a front 4-row shank-based cultivator unit with a pneumatic seed drill in a single pass. Merlin.4 metering unit with a 1–450 kg range without changing rollers. Removable hopper of 3,000–4,000 l. ISOBUS and 4-section GPS cut as standard.
TRANS.
Designed for deep preparation and seeding in compacted soils or with significant stubble residues. The 4-row shank module works deeper than the disc-based cultivator and provides decompaction prior to seeding.
DOC-AGR · TECHNOLOGY ARADOR & VOMER · 2026 18 PARAM.
// Technical specifications
DATA SHEET # Parameter Value
01
| Machine type
Seed drill with 4-row shank-based cultivator unit, articulated hitch
02
| Hitch
Articulated Cat. 3N · Cat. 3
03
| Working width
3.00–6.00 m
04
| Transport width
3.00 m
05
| Cultivator module
4-row shanks
06
| Number of shanks
17 (Kharma 30) · 25 (40) · 31 (50) · 37 (60)
07
| Seeding row spacing
12.5 cm or 16.7 cm
08
| Removable hopper capacity
3,000 l (Kharma 30 and 40) · 4,000 l (Kharma 50 and 60)
09
| Seeding shank
Hydropneumatic preload adjustable from the cab
10
| GPS cut
4 sections · ISOBUS as standard
11
| Recommended power
120 to 350 HP
12
| Hopper opening
1.00 × 2.00 m
13
| Metering unit
Merlin.4 — 1 to 450 kg without changing rollers
14
| Packer tyres
445/50 R19.5
15
| Transport wheels
550/45 R22.5 (PRO models of 5 and 6 m)
16
| Working speed
8 to 18 km/h
17
| Connection
ISOBUS as standard
18
| Hydraulic outlets
3 + 1 (single-acting) double-acting · 1 unpressurised return (max. 5 bar)
Approved data · subject to configuration
18 REG.
OK
// Dimensions
Available models
[ CERTIFIED DATA ]
01 Kharma 30 C-PRO/C
models - Working width
- 3,00 m
- Transport width
- 3,00 m
- 4-row shanks
- 17
- Hopper
- 3 000 l
- Rec. power
- 120–200 hp
- Hitch
- Cat. 3 / 3N
- Tyres
- 445/50 R19.5
- Depth wheels
- optional
02 Kharma 40 C-PRO/C
models - Working width
- 4,00 m
- Transport width
- 3,00 m
- 4-row shanks
- 25
- Hopper
- 3 000 l
- Rec. power
- 180–250 hp
- Hitch
- Cat. 3
- Tyres
- 445/50 R19.5
- Depth wheels
- 1× SW270
03 Kharma 50 C-PRO/C
models - Working width
- 5,00 m
- Transport width
- 3,00 m
- 4-row shanks
- 31
- Hopper
- 4 000 l
- Rec. power
- 220–300 hp
- Hitch
- Cat. 3
- Tyres
- 550/45 R22.5
- Depth wheels
- 2× SW270
04 Kharma 60 C-PRO/C
models - Working width
- 6,00 m
- Transport width
- 3,00 m
- 4-row shanks
- 37
- Hopper
- 4 000 l
- Rec. power
- 280–350 hp
- Hitch
- Cat. 3
- Tyres
- 550/45 R22.5
- Depth wheels
- 2× SW270
4 models · Kharma C PRO/C (4-row shanks)
// Application Fields · Tactical Map
Application
application.
Active zones: 09 / 09
Status: operational
Ref: AGR-MAP-V1
R1
R2
R3
Col A
Col B
Col C
Col D
A1
01
Wheat
B1
02
Barley
C1
03
Oilseed rape
D1
04
Sunflower
A2
05
Triticale
B2
06
Legumes
C2
07
Conventional seeding
D2
08
Minimum tillage
A3
09
Compacted soils
Col A
Col B
A1
01
Wheat
B1
02
Barley
A2
03
Oilseed rape
B2
04
Sunflower
A3
05
Triticale
B3
06
Legumes
A4
07
Conventional seeding
B4
08
Minimum tillage
A5
09
Compacted soils
Photo record
Photo
documentation.
Photo record
01 10
Product
Kharma C PRO
Format
Photo · Field
Ref.
VOM·2026·FIG.01
Total records
10 registros
// Photo documentation VOM·2026
Active record
FIG.01 — Kharma C PRO
▶ VID.01
VID.01
▶ VID.02
VID.02
▶ VID.03
VID.03
FIG.01
FIG.02
FIG.03
FIG.04
FIG.05
FIG.06
FIG.07
// Engineering & Design
Construction
overview.
12
Parameters
Operating system
01 Front 4-row shank-based cultivator unit with independent operation from the seeding line
02 Removable hopper on all models
03 Quick-change system for the rear roller (standard)
04 Hydraulic depth and pressure adjustment on the seeding shoes, operable from the cab without leaving the tractor
05 High pivot on all seeding systems, improving response to obstacles and reducing seeding failures
06 Hydropneumatic preload system, adjustable on the seeding bodies
07 Merlin.4 metering unit (Vomer): electronic metering, 4-section control, no roller changes in the 1–450 kg range
08 GPS-integrated 4-section cut system (2 sections on the 3.00 m model)
09 ISOBUS connection (standard)
10 Double-acting hydraulic outlets: 3 + 1 (single-acting) (standard)
11 1 unpressurised return, max. 5 bar (standard)
12 Front depth wheels (SW270): 1 unit on model 40, 2 units on models 50 and 60; optional on model 30
// COMPETITIVE ADVANTAGES
Why choose this machine.
01
The 4-row shank-based cultivator unit allows greater working depth and decompaction
02
A single machine performs both soil preparation and seeding, together or separately
03
The GPS 4-section cut system prevents overseeding, saving seed and reducing accumulations
04
The A750 flat roller reduces drag, lowering power and fuel consumption
05
The KORE roller (U profile) shows minimal wear when working "soil against soil"
06
Hydropneumatic preload can be adjusted from the cab without leaving the tractor
ORIGINAL SPARE PARTS
Implements and accessories
compatible.
5 groups
23 implements
100% genuine
- 01
RAW 12 (125 mm)Seeding body configuration with 12.5 cm row spacing. Available for Kharma X PRO, C PRO, DIREKTA and DIREKTA+.
- 02
TEN 17 (167 mm)TEN seeding body configuration with 16.7 cm row spacing. Available for Kharma X PRO, C PRO, DIREKTA and DIREKTA+.
- 03
DISC 17 (167 mm)DISC seeding body configuration with 16.7 cm row spacing. Available for Kharma X PRO, C PRO, DIREKTA and DIREKTA+.
01
RAW 12 (125 mm)
02
TEN 17 (167 mm)
03
DISC 17 (167 mm)
// TECHNICAL LEGEND · SYSTEMS & MODULES
SYSTEM
Merlin.4
ID·001 · ACTIVE
Merlin.4 electronic metering unit
Metering from 1 to 450 kg/ha without changing rollers. Precision electric motor, automatic calibration, real-time per-row monitoring.
SYSTEM
ISOBUS
ID·002 · ACTIVE
ISOBUS as standard
Compatible with the tractor's original terminal without additional modules. Full control of the seed drill.
SYSTEM
4 GPS sections
ID·003 · ACTIVE
GPS 4-section automatic cut
Automatically cuts seeding in 4 independent sections based on GPS. Zero overlap, seed savings of up to 10%.
PLATFORM
C-PRO
ID·004 · ACTIVE
C-PRO module
Front 4-row shank-based cultivator unit. Greater working depth and decompaction prior to seeding. Ideal for compacted soils and demanding tillage conditions.
10
Years of Warranty
REF: #VOMER-2024
SERIE: AGR-10Y-BRZ
SERIE: AGR-10Y-BRZ
Arador & Vomer
Manufacturer
Arador & Vomer · Official certificate
Warranty
Certificate
Art. I The catalogue lists minimum maintenance as a design feature, without specifying concrete warranty periods or maintenance intervals
Arador & Vomer
Manufacturer
Arador & Vomer · Valid from issue date arador.pro
0€
AFTER-SALES SERVICE
All included.
Zero cost.
5 free services
1998 in the field
∞ post-warranty support
01
Delivery
All Europe
FREE
01
02
Commissioning
At your farm
FREE
02
03
Training
Theory + practice
FREE
03
04
Warranty
Support 24/7
FREE
04
05
Post-warranty
Forever
FREE
05
Technical response within 24h
No small print or exclusions
Financing available
Frequently asked questions
Everything you need to know
01
What is the difference between Kharma C PRO and Kharma X PRO?
See answer
02
What tractor power do I need?
See answer
03
Can it seed oilseed rape and cereals with the same equipment?
See answer
04
What section management capacity does it have?
See answer
Coming soonAgricultural analysis
We’re building the newsroom
A farm-analysis outlet —grain prices, CAP rules, input costs— written by people who work the land. Right now we’re bringing the writers together.
Do you write about farming? Join the newsroom→- 01Regulations & subsidies
- 02Costs
- 03Markets & climate